Skip to content
HumberValley Garage Door Co.Open 24/7 (289) 804-5885
Hand pressing a button on a gray keypad with its cover open beside a garage door, the other holding a black remote. — Islington

HumberValley Garage Door Co.

Springs Openers Doors

Open 24/7

(289) 804-5885

Garage Doors in IslingtonAn old opener,
brought up to date.

Many openers still running in Islington predate photo-eyes and rolling-code remotes. Replacing one brings a quieter motor, a battery backup for power cuts, sensors that stop the door for a child or a pet, and remotes that cannot be copied from the driveway, all installed and tested in a single visit.

Request a visit

Same fees day or night · Islington

Islingtoninformation

TorontoOntario

Town
Islington, Toronto
In business
22 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Phone
(289) 804-5885
Work
repairs, springs, openers, new doors
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 58 in 100 homes · older homes
  • About 58% of homes in Toronto were built in 1980 or earlier, according to the 2021 Census.Older houses frequently have a garage door that was replaced once already, sometimes with a door chosen for the opening rather than the building. When that door reaches its end, there is a chance to pick a style that suits the house properly, and we measure with that in mind.
  • Single-detached houses make up about 23% of homes in Toronto (2021 Census).Attached housing frequently has tandem or tight garages with limited headroom and little side room, so replacement openers and tracks are chosen to fit those dimensions. A low-headroom track kit or a wall-mounted jackshaft opener often solves what a standard unit cannot.

Source: Statistics Canada, Census Profile

Nearby

Open Islington in Google Maps

Islington

Garage door services · Islington

A door in Islington that is lifting unevenly, dropping too far, screeching on the rails or refusing the remote is telling you which part is tired. Our services are grouped around those parts, springs and cables, tracks and rollers, openers and controls, so the fix is easy to identify.

Person in a dark shirt standing before a closed cream sectional door, looking up at a coiled spring and red-tipped cord. — Off-Track Garage Door Reset, Islington

Islington

Wind-Rated Garage Door Replacement, Garage Door Cable Replacement, Garage Door Remote and Keypad Programming…

Islington

A door in Islington that is lifting unevenly, dropping too far, screeching on the rails or refusing the remote is telling you which part is tired. Our services are grouped around those parts, springs and cables, tracks and rollers, openers and controls, so the fix is easy to identify.

Job sheet1 of 4

Off-Track Garage Door Reset

Technician in safety glasses and tan-patched gloves fitting tools to a spring bracket above a gray door, beside a blue stepladder. — Islington
The call
The door came down fine but with a scraping noise, and now the vertical track on one side is bowed away from the wall. Two screws have pulled out of the wood and the roller nearest the floor has no rail around it.
First step
Which rollers left, and at what point in the travel

ServiceOff-Track Garage Door Reset

Job sheet2 of 4

Garage Door Manual Lock Repair

Person leaning close to a white paneled door, one hand on a metal slide-bolt bar mounted across the panel. — Garage Door Manual Lock Repair, Islington
The call
On the old wooden door out back, one lock bar hangs loose from a rusted guide and the other is bent at an angle, so the handle turns but the door can still be lifted a hand's width from outside.
First step
What the household wants the lock for

ServiceGarage Door Manual Lock Repair

Job sheet3 of 4

Garage Door Cable Replacement

Two coiled steel cables with loop and stop ends on a workbench. — Garage Door Cable Replacement, Islington
The call
Someone left the snow shovel leaning in the opening and the door came down on it. Now a loop of steel cable hangs loose beside the track and the door refuses to close the last few inches.
First step
Torsion or extension, and which lift

ServiceGarage Door Cable Replacement

Job sheet4 of 4

Garage Door Balance Adjustment

Technician holding a notebook while looking at a closed sectional door. — Garage Door Balance Adjustment, Islington
The call
Released from the opener, the door will not hold anywhere. Lift it to hip height, take your hands away, and it sinks back to the concrete, gathering speed on the way down.
First step
Cables, drums and whether the door sits level

ServiceGarage Door Balance Adjustment

Fig.1
Garage Doors

Anatomy of a garage door

Drawn forIslington
ScaleNot to scale

Cold snaps take a toll on springs already near the end of their life. A coil that was hanging on through the summer often lets go on the first hard frost. These services replace it and its partner properly.

  1. Part 1The panels

    Garage Door Panel Replacement

    The inside face of one section has started to bow outward and the outer skin has a soft, wavy look. Tap it and it sounds hollow in places.

  2. Part 2The springs

    Torsion Spring Replacement

    After pulling the red release cord, you tried lifting the door yourself and it would barely leave the floor. A door that used to glide up with one hand now takes real effort, which points to the counterbalance rather than the opener.

  3. Part 3The cables

    Garage Door Cable Replacement

    There was a sharp crack from the garage, and when you went to look the door had dropped on one side and jammed. A length of cable lies coiled on the floor by the bottom roller.

  4. Part 4Tracks and rollers

    Garage Door Roller Replacement

    The door is the one the builder installed and has never had a part changed. It works, but it clatters, the wheels are hard white plastic with no bearings in them, and the opener sounds like it is labouring more each season.

  5. Part 5The opener

    Garage Door Opener Diagnosis and Repair

    For a few days there was a grinding sound whenever the door started moving. Now the motor spins freely and the door stays exactly where it is.

Garage Door Safety Inspection. There is a new sound.

Request a visit

Have a question?

Why does the door need a balance test after being reset?

Balance shows that the springs are carrying the door's weight so the opener only guides it. After a reset the door is disconnected from the opener, raised by hand to the halfway point and released; a balanced door holds there with little drift. If it falls or shoots up, the counterbalance needs adjusting before the opener is reconnected, otherwise the motor strains and the rollers are pushed out of line again.

My key will not turn in the cold. What is happening?

Meltwater has run down the door face into the keyway during a thaw and frozen overnight, or cold has stiffened old lubricant inside the cylinder. Lock de-icer or gentle warmth frees it; hot water is avoided because it refreezes and can crack cold metal. Afterwards the cylinder is dried and given a dry graphite or PTFE lubricant that sheds moisture instead of trapping it.

What should I do while waiting for the visit?

Leave the door in the position it is in and stop using the opener. Move the car and anything else you need out of the garage by another door if you can, and clear the floor near the door so the technician has room to work. If a cable jumped because the door closed on something, leave the object where it was; it helps explain what happened.

How is door balance tested?

With the door closed, the opener is released so the door is free. It is lifted by hand to about a metre, then to fully open, and let go at each point. A door in balance holds its position; one that rises on its own is over-tensioned and one that drops is under-tensioned. The door should also move freely and no faster than the hand pushing it.

On-site assessment

Request a visit.

Ask us to look at your door in Islington.

(289) 804-5885, open 24/7.